Description: This Pusher PRC1318MW intake system is a game - changer for your 2013 - 2018 Dodge Ram with a 6.7L Cummins engine. Most Pusher products are special orders and take 1 - 2 weeks for delivery. Contact us for stock levels if you need it sooner. The intake manifold has a 3.5' inlet that smoothly transitions into two 3' Mandrel - bent tubes. It uses a short bolt instead of the long side driver - side flange bolt, freeing up more airflow while keeping the OEM six - bolt pattern. The twin - tube design nearly doubles the outlet size of the OEM manifold and minimizes the impact of the first section of the number one injector line, resulting in a 49.4% increase in flow compared to the factory manifold. The intercooler tubes are made from 3.5' fully TIG welded, mandrel - bent, .060' thick tubing. They replace the restrictive 2.75' OEM tubes with free - flowing 3.5' tubes. Installation is a breeze; just loosen the factory clamps and install the supplied parts. You'll enjoy a 50° - 200°F drop in EGT's, a .5 - 1 MPG increase, deletion of factory emissions equipment, faster turbo spool, increased throttle response, and less strain on your motor. Part Number: PRC1318MW Features: - Enables use of a short bolt for more airflow - Maintains OEM 6 - bolt pattern - Nearly doubles OEM manifold outlet size - Minimizes impact of number 1 injector line - 49.4% flow increase - Built from fully TIG welded mandrel - bent tubing - Replaces restrictive OEM tubing - Lowers EGT's 50° - 200°F - .5 - 1 MPG increase - Deletes factory emissions equipment - Faster turbo spool - Increased throttle response - Less strain on motor Includes: - Pusher 3.5' Mega Intake System - Pusher Passenger - Side Intercooler Tube - Heavy - duty 4 - ply Silicone Couplers - Stainless T - Bolt Clamps - Polished Stainless Dipstick Mount - Matching Port Plugs - OEM Gasket - All Required Hardware Notes: - You need to delete all factory emissions equipment as the manifold has no provisions for it. - This product is not emissions compliant and is for off - road use only. - Select powder coating colors are available for an additional charge.

Using the Pusher PRC1318MW intake system is straightforward. First, make sure you have all the parts included in the package: the intake system, intercooler tube, silicone couplers, clamps, dipstick mount, port plugs, gasket, and hardware. Before installation, you'll need to delete all of your factory emissions equipment since the manifold doesn't support it. And remember, this product is only for off - road use. When installing, loosen the factory clamps on the existing tubes instead of cutting the steel bands. Then, simply install the new parts that come with the kit. For maintenance, regularly check the clamps to make sure they're tight. Inspect the silicone couplers for any signs of wear or damage. If you notice any issues, replace the parts as soon as possible. Also, since powder - coated options are available for the manifold, if you've chosen one, keep an eye on the coating for chips or scratches. If you see any, you can have it touched up to prevent rusting. This will help keep your intake system performing at its best and ensure a long lifespan for your product.