Description
Fits: 2013 - 2018 Dodge/Ram 3500, 4500, 5500 CAB & CHASSIS ONLY
The Monster - Ram intake system is a game - changer. It safeguards your C&C Ram from grid heater bolt failure, which could save you thousands on repairs. Plus, it significantly boosts airflow from the intercooler. With Banks’ High - Flow Heater and Billet Intake Plate, it achieves a Mass Air Flow (MAF) of 72.7 lbs/min, far better than the stock's 38.6 lbs/min.
This system raises boost without upping backpressure at the turbine. You'll get a more responsive and power - efficient engine with extra headroom for high - horsepower needs.
Part Number: 42804 - N & 42804 - R
Complete System
Banks’ High - Flow Heater and Billet Intake Plate form a perfect combo. The High - Flow Heater lets you ditch the restrictive stock heater grid plate. The new vertical coil - style heater warms your engine in cold starts like the stock one but without blocking airflow. Swapping the stock grid heater plate with the Banks High - Flow Intake Plate eliminates all airflow obstructions and turbulence.
Features
- Protects your vehicle from grid heater bolt failure, saving big on repairs
- Banks - exclusive vertical coil heater doesn't hinder airflow. Replace the factory grid heater with the Banks High - Flow Billet Plate and keep OEM - like cold - start performance
- Quicker throttle response
- Flows over 88.3% more than stock
- Optimizes air pressure and distribution
- Larger and less restrictive than the stock intake
- Improves oxygen - rich air flow into cylinders
- Raises boost without increasing turbine drive pressure
- 3 - 3/8 inch inlet
- Red powder coat finish
- Four 1/8 inch NPT ports
- High - flow Banks Coil Heater
- Matches stock mounting points
- Comes with a proprietary fuel line and all necessary hardware
Instructions
Videos
Using the Monster - Ram intake system is straightforward. First, make sure your vehicle is turned off and cooled down. You can then start the installation process by following the included instructions. Match the stock mounting points to fit the system properly. The system comes with a proprietary fuel line and all necessary hardware, so you have everything you need. When it comes to maintenance, keep an eye on the air filter. A dirty filter can reduce airflow and affect performance. You may need to clean or replace it periodically. Also, check the connections regularly to ensure they are tight and there are no signs of damage. In cold weather, the High - Flow Heater will help with engine starts. Just start your vehicle as you normally would, and the heater will do its job. Be careful not to over - tighten the bolts during installation, as this could damage the components. If you encounter any issues, refer to the instructions or contact customer support.
