Description
Fits
| Year | Make | Model | Engine |
| 2013 - 2018 | Dodge Ram | 3500 | 6.7L Cummins |
| 2014 - 2018 | Dodge Ram | 2500 | 6.7L Cummins |
The BD Diesel 1030705 lets you run 2WD Low in your Cummins. It manually disables the front - wheel drive. With the hubs in free (2wd) mode and the t - case in 4wd low range, the front wheels disengage, sending all torque to the rear wheels.
Part Number: 1030705
Features
- Easy installation: just plug the kit below the glove box.
- No need to cut or splice wires, and no wires through the firewall.
- Comes with an illuminated rocker switch for control and to show when the front axle is overridden.
- Manually disable the front - wheel drive for more torque on the rear wheels.
- Enables sharp turns without front axle u - joint issues.
- With this kit, the front wheels won't be driven by the transfer case.
- Get full power and torque in high - gear reduction on the rear axle only.
Warranty
This BD Diesel 1030705 kit is for 2013 - 2018 Dodge Ram 2500 and 3500 with 6.7L Cummins engines. To use it, simply plug the kit below the glove box. There's no need to cut or splice wires or run them through the firewall. The illuminated rocker switch helps you control the system and shows when the front axle is being overridden. When you want to run in 2WD Low, set the hubs to the free (2wd) mode while having the transfer case in 4wd low range. This will disengage the front wheels and send all the torque to the rear wheels. As for maintenance, keep an eye on the wiring connections to make sure they are secure. If you notice any problems or the illuminated switch stops working, check the warranty. The kit comes with a 12 - month or 12,000 - mile warranty, so you can reach out to the manufacturer for support.
