Description
Fits
| Year | Make | Engine |
| 2015 - 2018 | GMC/Chevrolet | 6.6L Duramax |
The BD Diesel 1030711 is a great addition for your Duramax. It enables you to run 2WD Low by manually disabling the front - wheel drive. When the hubs are in free (2WD) mode and the transfer case is in 4WD low range, the front wheels disengage, sending all torque to the rear wheels for better performance.
Part Number: 1030711
Features
- Easy installation - just plug the kit in below the glove box.
- No need to cut or splice wires, and no wires through the firewall.
- Comes with an illuminated rocker switch for easy control and to show when the front axle is overridden.
- Allows you to manually disable the front - wheel drive, maximizing rear - wheel torque.
- Enables sharp turns without front - axle u - joint hopping or binding.
- With this kit, the front wheels won't be driven through the transfer case.
- Get full power and torque with high - gear reduction on the rear axle only.
Warranty
Using the BD Diesel 1030711 is a breeze. First, install the kit by plugging it in below the glove box. There's no need to cut or splice wires or run them through the firewall. Once installed, you can control it with the illuminated rocker switch. When you want to use 2WD Low, put the transfer case in 4WD low range and hold the hubs in the free (2WD) mode. This will disengage the front wheels and send all the torque to the rear wheels. When making sharp turns, you'll notice the front - axle u - joint won't hop or bind. Just remember, this kit is covered by a 12 - month or 12,000 - mile warranty. There's no special maintenance needed, but if you experience any issues, refer to the warranty terms or contact customer service.
