Description

This is the first step in your air filter cleaning process. It's suitable for any S&B filter and 95% of other high - performance filters on the market.

Part Number: 88 - 0622

Features

• Boost filter performance and extend its lifespan.
• Comes in a 32 OZ size.
• Equipped with an easy - to - use trigger applicator.

Installation

STEP 1

Remove and Clean

• Wipe the sealing area of the filter and filter housing with a clean soft rag.
• Tap the filter on a hard surface to shake off large particles and debris. You can also use a soft brush to loosen stubborn debris or bugs.
• Apply S&B’s Filter Cleaner to clean the filter thoroughly.
• Rinse the cleaner out gently with low - pressure water.
• Let the filter dry for at least 24 hours.

STEP 2: Fill & Apply

STEP 3: Inspect and Install

Videos

How to use: First, take out the filter and clean the sealing area and housing with a soft rag. Then, tap the filter on a hard surface or use a soft brush to get rid of large particles and debris. Next, use this cleaning solution to clean the filter and rinse it with low - pressure water. Let it dry for at least 24 hours. After that, you can fill and apply as needed and finally inspect and install the filter. Attention: Make sure to use low - pressure water when rinsing to avoid damaging the filter. Maintenance advice: Keep the cleaning solution in a cool and dry place. If the filter gets dirty again, repeat the cleaning process.