This Duramax Fuel Filter Head Delete Kit (DUR - FUE - A034) is a great solution for 2001 - 2016 GMC 2500/3500 models with a 6.6L Duramax engine. If you're using an aftermarket Duramax lift pump with integrated filtering, the OEM filter head can be a trouble - maker, causing failures and restricting flow. This kit simplifies things. It uses OEM fuel hoses, connects them back, and eliminates potential failure points and unnecessary complexity. Just remove the filter head and install the formed tube between the two hoses. The kit features CNC - formed stainless tubing, CNC machined barbing for a reliable hold, and is made with North American hardware. Note that you need to remove the factory water in the fuel sensor, and it won't trigger any check engine light codes. Also, an aftermarket lift pump and filter setup are required.

Using this Duramax Fuel Filter Head Delete Kit is easy. First, make sure you have an aftermarket lift pump and filter setup. Then, unbolt your existing filter head. Next, take the formed tube from the kit and place it between the two hoses that were connected to the filter head. You'll also need to remove the factory water in the fuel sensor, but don't worry, it won't cause any check engine light issues. As for maintenance, keep an eye on the CNC - formed stainless tubing and the CNC machined barbing. If you notice any signs of wear or damage, it might be time to check or replace the parts. Since it's made with North American hardware, it's built to last, but regular inspections will ensure it continues to work well for your 2001 - 2016 GMC 2500/3500 with a 6.6L Duramax engine.