These EBC rear brake pads are a great choice for multiple Ford, Kia, Lincoln, Toyota, and Volkswagen models. A key feature is the Thermic Black coating. This coating is an anti - corrosion shield that provides long - lasting rust resistance. There's no need to remove it before installation. Don't use brake cleaner or other methods to take it off the discs rotors. The brake pads will naturally remove the coating in the swept area within the first 10 to 20 stops after installation on your vehicle. Note: Do not fit upgrade pads to the rear of the vehicle unless the same upgrade is fitted to the front. Check the compatibility table below to see if your vehicle is a match.

How to Use: First, make sure your vehicle model is in the compatibility list. When installing, don't worry about removing the Thermic Black coating on the brake pads. Just put the pads in place as normal. After installation, take your vehicle for a short drive and make 10 to 20 stops. This will help the brake pads wear in and remove the coating in the swept area. Things to Note: Never fit upgrade pads to the rear without upgrading the front pads as well. Avoid using brake cleaner or any other method to remove the Thermic Black coating. Doing so is not covered by the EBC warranty. Maintenance Advice: Regularly check the brake pads for wear. If you notice reduced braking performance or unusual noises, it's time to inspect or replace the pads. Keep your brakes clean and free from debris for optimal performance.