This heavy - duty cast aluminum transmission pan (Part Number: 328053220) is a perfect fit for various Ford and Lincoln models from 2017 to 2023. Models include Ford Bronco, Lincoln Navigator, Ford Ranger, Ford Mustang, Ford F - 150, and Ford Expedition with different engines like 2.7L, 2.3L, 3.5L, 3.3L, 3.0L, and 5.0L. As Ford owners know, the 10R80 transmissions can generate a lot of heat even during normal driving. Heat can damage the transmission internals and burn the fluid. This PPE aluminum transmission pan is designed to provide superior cooling by directing heat away from the internals. It's made of high - grade A356.0 - T6 heat - treated cast aluminum alloy, a permanent replacement for the stock plastic pan. It has 3/4 - inch external cooling fins to reduce fluid temperature, a large 1 - inch Neodymium magnet - equipped billet 304 stainless steel drain plug with Viton O - ring, and a 1/8 inch NPT port for an optional temperature probe. It reuses OEM gasket, bolts, and studs and is available in Raw, Brushed, and Black powder coat finish. It also comes with a limited lifetime warranty.

Using this transmission pan is straightforward. First, make sure your vehicle is turned off and the engine is cool. Locate the old transmission pan and carefully remove it, taking note of how the bolts and gaskets are positioned. Place the new pan in the same spot, reusing the OEM gasket, bolts, and studs. Tighten the bolts evenly to ensure a good seal. When it comes to maintenance, check the fluid level regularly. The external cooling fins help keep the fluid cool, but it's still important to monitor the temperature. If you've installed the optional temperature probe, use it to keep an eye on the fluid temperature. Every once in a while, remove the drain plug to drain the fluid and clean the magnet to remove any metal shavings. Remember, this pan has a limited lifetime warranty, but proper use and maintenance are key to keeping it in good condition.