This HD adjustable rear track bar is designed for 2018 - 2020 Jeep Wrangler models, including Rubicon, Sport, and more. It helps center your axles when you install a suspension lift. It's much stronger than the stock one, perfect for large tires and rough off - road driving. You can easily adjust its length on the vehicle. Key features: Allows rear axle centering during suspension lift, adjustable without removal, maintenance - free, uses Synergy Dual Durometer Bushings to avoid binding, no hard - to - tighten jam nuts, no installation modifications needed, reduces NVH for a smoother ride, bent to clear most aftermarket differential covers, and comes with a limited lifetime warranty. It's made of high - quality 1.50' x.250 wall DOM, retains factory mounting bolts, has an abrasion - resistant powder coat finish. The Synergy double adjuster sleeve makes length adjustment easy. Compatible with 0 - 6 inches of lift. Part Number: 8862 - 01.

Using this adjustable rear track bar is simple. First, make sure your Jeep Wrangler is from 2018 - 2020. When you install a suspension lift, this track bar will help center your rear axle. You can adjust its length right on the vehicle without removing it. No need to grease it as it's maintenance - free. For lifts 2 inches and taller, we recommend using the Synergy MFG 8856 - 01 Rear Track Bar Relocation Bracket and having at least 2 inches of bump stop spacing. The replacement adjustable joint is 4811 - 01 and the replacement bushings are 4327 - 01. The minimum collapsed length is 37.50 inches and the maximum extended length is 38.38 inches. To maintain it, keep an eye on the powder coat finish. If there are any signs of damage, it could lead to corrosion. Overall, this track bar is built to last and gives you a better off - road experience.