Description
Fits
| Year | Make | Model |
| 2022 - 2024 | Toyota | Tundra w/ Rear Air |
If you want to lift your Tundra moderately, quickly, and affordably without sacrificing factory suspension or ride quality, ReadyLift's lift kit is your top choice. It comes with a front strut spacer, so you don't have to deal with spring compression. The rear airbag spacers let you use the full range of the vehicle.
Part Number: 69 - 52330
Features
- Keeps the OEM load - leveling system fully functional
- Keeps the factory turning radius
- No spring compression needed
- No modifications required
- Allows for fine - tuning
- Won't affect the factory aid control system
Tire Fitment:
- 35x12.50 tall tires work on 18'x9' wide wheels with a +12mm offset
Additional Info
Includes:
- Front Strut Spacer
- Driver & Passenger Upper Control Arm
- Driver & Passenger Front Differential Drop
- Crush Sleeve, Differential Drop Polyurethane Bushing
- End Link Spacers
- Driver & Passenger Brake Line Relocation Bracket
- Rear Brake Line Relocation Bracket
- Driver & Passenger Airbag Spacer
- Driver & Passenger Bump Stop Extension
- Rear Shock Extensions
- Rear Brake Line Spacers - Tall
- Rear Brake Line Spacers - Short
- Airbag Ride height Sensor Brackets
- Hardware Pack
Notes
- Don't use on 2022+ Tundra TRD Pro with Bilstein coilover shocks or trucks with the TRD rear sway bar option and Load - Leveling Rear Height Control Air Suspension
- Works only with factory 20' wheels. Most aftermarket wheels are okay, but check fitment before installation.
- Toyota recommends and ReadyLIFT requires Toyota OEM lift kit cv shafts PT362 - 3432B and PT362 - 3431B for all lifted 22 - UP Tundra's. Not using them may cause damage not covered by the manufacturer or ReadyLIFT's warranty in 4WD.
Using this lift kit is quite straightforward. First, make sure your vehicle is a 2022 - 2024 Toyota Tundra with rear air, and not a 2022+ Tundra TRD Pro with Bilstein coilover shocks or a truck with the TRD rear sway bar option and Load - Leveling Rear Height Control Air Suspension. Also, ensure you're using factory 20' wheels or confirm the fitment of aftermarket wheels before starting the installation. When installing, use the included parts as described in the additional info section. You won't need to compress the springs, which makes the process easier. The kit allows for fine - tuning adjustments, so you can get the lift just right. For maintenance, regularly check all the installed parts for any signs of wear or damage. If you use the vehicle in 4WD, make sure you've installed the recommended Toyota OEM lift kit cv shafts PT362 - 3432B and PT362 - 3431B to avoid damage that won't be covered by the warranty.
