Description
Fits
The Product Has Been Discontinued.
| Year | Make | Engine |
| 1994 - 1998 | Dodge Ram | 12V 5.9L Cummins (or any engine with a p7100 injection pump from inside the cab) |
With just a turn of the knob, you can adjust the rack travel from 0mm to 21mm. The in - cab control box gives you full pump control in one revolution. It retains the AFC housing for great drivability. You can fine - tune for max power and best economy without leaving your seat!
The P7100 is well - known for easy fuel - flow modification, but high - flow ones can be unstreetable. The Attitude Adjuster lets you reduce fuel below stock, giving your modified truck a longer pump life and better street performance.
Part Number: 1020
Features
- In - Cab pump control
- 100% mechanical and lasts the vehicle's lifetime
- Increased power
- Reduce fuel below stock
- Longer pump life and better driveability
- All necessary hardware included
- Works on every P7100 injection pump without modification
- Proven by flow - bench and dyno tests
Notes
- These profiles are dynamic, so Industrial Injection gives only application recommendations, not hp ratings.
Installation
- The Attitude Adjuster directly replaces the cam plate without removing the injection pump. It's as easy as swapping a cam plate.
Using the Attitude Adjuster is simple. Just turn the knob in the in - cab control box. You can adjust the rack travel anywhere from 0mm to 21mm. This gives you full control over the pump's operation. For best results, make small adjustments to find the sweet spot for maximum power and economy. When it comes to installation, it directly replaces the cam plate. You don't need to remove the injection pump. It's like a quick swap of a cam plate. As for maintenance, since it's 100% mechanical, there isn't much to do. Just keep it clean and check for any loose connections from time to time. Remember, Industrial Injection doesn't give hp ratings for this part because the profiles are dynamic. They only offer recommendations for your specific application.
