Description
Fits
| Year | Make | Model | Engine |
| 2003 - 2018 | Dodge Ram | 2500/3500 | 24V 5.9L / 6.7L Cummins |
Check out this brand - new, fully - featured auxiliary fuel filter kit designed for 2003 - 2018 Dodge Cummins engines. It's an upgrade from our standard auxiliary kit, with a high - flow fuel heating element and a Water - In - Fuel (WIF) sensor. This kit has everything you need to route, plumb, and filter fuel for your Cummins engine, from the Fleece Performance lift pump to the injection pump. It makes accessing the fuel filter easier and cuts down on your long - term maintenance costs with an affordable Donaldson filter.
This kit comes with a fuel filter base with an integrated heater and mounting hardware, a Donaldson 3 - micron fuel filter and water separator, push - lock hoses, all necessary AN and barb fittings, CP3 feed fittings for 5.9L and 6.7L CP3 pumps, a Water - In - Fuel (WIF) sensor, and an adaptation harness.
Part Number: FPE - CUMM - HFFBA - 0318
Features
- Comes with all installation components
- Improves fuel filter access and reduces long - term maintenance costs
- Temperature switching points: ON at 28.4F +/- 5.4F, OFF at 48.2F +/- 5.4F
- At normal fuel flow rates, the heating element boosts the temperature by 4 - 8F
Notes
- You need a Fleece Performance fuel filter delete, which should be pre - installed or bought separately.
- The kit doesn't include a quick - disconnect fitting for the OE lift pump. If you're using a stock OE sending unit on the fuel tank, use Part Number FPE - QUCON - OE - 38 for an AN connection to the stock quick - disconnect fitting.
Instructions
Warranty
- 1 Year Limited (parts only)
Using this auxiliary heated fuel filter kit is straightforward. First, make sure you have a Fleece Performance fuel filter delete installed, as it's required for this product. The kit comes with all the parts you need for installation, like a fuel filter base with a heater, a Donaldson filter, hoses, and fittings. Connect everything from the Fleece Performance lift pump to the injection pump following the included instructions. When it comes to maintenance, the Donaldson filter is low - cost, so you can save money in the long run. Just replace it regularly as per the manufacturer's recommendations. Keep an eye on the Water - In - Fuel (WIF) sensor. If it detects water in the fuel, take appropriate action. The heating element has specific temperature switching points. It turns on at around 28.4F (give or take 5.4F) and turns off at about 48.2F (give or take 5.4F). At normal fuel flow, it will increase the fuel temperature by 4 - 8F. If you're using a stock OE sending unit on the fuel tank, you'll need to get the Part Number FPE - QUCON - OE - 38 for the connection. This kit has a 1 - year limited warranty on parts only, so if something goes wrong with the parts during this time, you can get it sorted out.
