Don't use the product pure. Mix it with soft water for the right freezing protection as per the chart. Keep anti - corrosion by not diluting below 33%. Use soft water (max hardness 35°F, max 50 ppm chlorides and sulfates) if possible. Follow manufacturers' advice for drain intervals. Check or drain coolant only when the engine is cold. Not for protecting drinking water systems. Handle with care.

To use this Motul coolant, never use it straight. Instead, mix it with soft water. Look at the chart to figure out the right amount of water for the freezing protection you need. Make sure you don't dilute it below 33% to keep its anti - corrosion power. Try to use soft water with a maximum hardness of 35°F and no more than 50 ppm of chlorides and sulfates. When it's time to drain the coolant, follow what the car manufacturer says. And always remember, only check or drain the coolant when the engine is cold. Also, don't use this coolant to stop drinking water systems from freezing. Just follow these steps and your engine will stay in good shape.