Description

Fits

Year	Make	Model
2023 - 2024	Ford F - Series	6.7L Powerstroke High - Output ONLY

Don't worry about your OEM charge pipe failing. These charge pipes from Pusher are a perfect match. They're TIG welded, mandrel bent, and CNC machined. Easy to install, they look great and can handle over 100PSI of boost. They work with any turbo setup, whether it's stock or aftermarket.

Part Number: PFP23XXHPO_N

Features

• Fully compatible with all stock or aftermarket turbos
• O - ring seal at the compressor outlet for a tight fit
• Tested to hold over 100PSI
• New HD silicone connections and stainless t - bolt clamps for durability
• Fully TIG welded, mandrel bent, and CNC machined steel charge tube

Additional Info

One Piece Hot Pipe:

• (1) FP15XXHP | Pusher HD 3' Hot Side Charge Tube
  (1) PSS3 x 4.6 | Silicone 3' Black 5 - Ply, 4.6' Long
  (2) TC_3 | T - Bolt Clamp for 3' Silicone Couplers, Stainless Steel
  (1) F67HP X - Ring | Ford 6.7L Compressor Outlet

Two Piece Hot Pipe:

• (1) FP15XXHP2 | Pusher HD 3' Hot Side Charge Tube
  (2) PSS3 x 4.6 | Silicone 3' Black 5 - Ply, 4.6' Long
  (4) TC_3 | T - Bolt Clamp for 3' Silicone Couplers, Stainless Steel
  (1) Anodized turbo inlet fitting | Ford 6.7L Turbo Adapter

Notes

• The one - piece option works well with factory or similar aftermarket intercoolers and turbos.
• If your aftermarket parts are different, Pusher suggests the two - piece option.

Using this charge tube is straightforward. First, make sure your vehicle is the 2023 - 2024 Ford F - Series with a 6.7L Powerstroke High - Output engine. Installation is easy, but if you're not confident, it's a good idea to get a professional to help. The tube can handle over 100PSI of boost, so you don't have to worry about it failing under pressure. When it comes to maintenance, regularly check the O - ring seal at the compressor outlet and the silicone connections. Make sure the t - bolt clamps are tight. If you notice any signs of wear or damage, replace the parts as soon as possible. If you have the one - piece configuration, it's designed for factory - like setups. If your aftermarket parts are different, the two - piece option is a better choice.